ENDY-Industrial Managed Multi-function GbE Media Converters with PoE+ Support

Industrial Managed Multi-function GbE Media Converters with PoE+ Support

Key Features:

Provide 2 10/100/1Gbps copper ports and 2 dual-speed SFP fiber port slots
Support 802.3x flow control for full-duplex and backpressure for half-duplex
All copper ports support auto-negotiation and auto-MDI/MDI-X detection
Dual-speed SFP slots support 100BASE-FX and 1000BASE-X SFP
SFP featured with Digital Diagnostic Monitoring (DDM) support
Multiple functions in one: - Dual media converts mode - Dual media converters sharing redundant fiber mode - Fiber to fiber media converter mode - 4-port switch mode
Link fault pass through (LFPT) featured for all media converter modes
Redundant ring function featured for 4-port switch mode
Support Gigabit full wire speed bridging & forwarding performance
Jumbo frame support up to 9600 bytes
Alarm relay output for events of power failure and configured port link down
Green Ethernet power saving
802.3az Energy Efficient Ethernet (EEE) support
Optional high power PoE PSE function on copper ports

Product Highlights:

Management Features:

Function mode configuration
Management: HTTP/HTTPS/SSHv2/CLI telnet/SNMP v1/v2c/v3/RMON DHCP/DHCPv6 client, DHCP relay, DNS client, NTPv4 IPv6 support, System Syslog, Configuration down/upload, Software upload HTTPS with TLS 1.2/1.3 support
Security: NAS, 802.1X, MAC-based/Web/CLI authentication TACACS+, IP source guard
Layer 2: QoS, 802.1Q VLAN, Storm control for UC/MC/BC packets, Static MAC configuration, IGMP v2/v3 snooping, MLD v1/v2 snooping, DHCP snooping, Multiple Spanning Tree – MSTP, RSTP, STP
KTI’s Auto Multi-Ring (KAMR) Technology: Fast failover response time, Auto recovery when failure is repaired, Works with RSTP network
KTI's PoE Redundancy function: Fast failover due to power off or link loss, Auto recovery when failure is repaired

Ordering Informations: