PMG1005-T20B
GPON SFU with 1-port GbE LAN
PMG1005-T20B
The Zyxel PMG1005-T20B GPON SFU with 1-port GbE LAN comes with one GPON uplink and one GbE LAN downlink to serve as a simple bridge to offer Gigabit data access to subscribers. Comparing with other FTTH solutions, the Gigabit Passive Optical Networking (GPON) features Point-to-Multi-Point (P2MP) architecture that enables service providers or system integrators to provide Gigabit broadband access with the least CAPEX investment to make it very competitive and popular among operators.
GPON Features:
GPON Features:
- Comply ITU-T G.984/G.988 GPON standard:
- G.984.1 general characteristics
- G.984.2 Physical Media Dependent (PMD) layer specifications
- G.984.3 transmission convergence layer specifications
- G.984.4 ONT management and control interface specification
- G.988 ONU Management and Control Interface (OMCI) specification
- Comply with class B+ type PMD
- Transmission rate: 2.488 Gbps (DS)/1.244 Gbps (US)
- Wavelength: 1490 nm (DS) & 1310 nm (US)
- Physical distance reach to 20 km
- Dynamic Bandwidth Allocation (DBA)
- Configurable AES DS and FEC DS/US
- GPON Encapsulation Method (GEM) supports Ethernet packet
- Supports GEM header removal/insertion and data extraction/ segmentation (GEM SAR)
- Flexible Mapping between TCON and GEM port
- Support up to 4 T-CONs each with priority queues (US)
- MAC address learning
- MAC filtering
- Multicast transparent
- IPv6 address transparent
- IGMP v1/v2/v3 snooping
- IGMP immediate leave
- IPv6 MLD v1/v2 snooping
- VLAN IEEE 802.1Q
- Ethernet port based VLAN tag and un-tag
- Protocol based VLAN support
- 1:1 VLAN, N:1 VLAN, VLAN transparent bridge
- LAN port-based VLAN tag add and tag removal
- Q in Q VLAN
- 802.1p priority with 4 queues
- Flow mapping base on 802.1p/VLAN ID
- Standard OMCI (ITU-T G.984.4)
- Telnet (CLI)
- Web GUI (HTTP)
- Firmware upgrade via FTP/TFTP/HTTP