ET4205-SX
1Gbps Multimode Optical Transceiver Wide Operating Temperature: -40°C~85°C
Overview
The Edgecore ET4205-SX transceiver is a small form-factor pluggable (SFP) module with a standard duplex connector for ï¬ber communications. This cost-effective module is designed for multimode ï¬ber (MMF) and operates at a nominal wavelength of 850 nm with high performance. The module supports an SFP 20-pin connector for hot-plug capability.
Transmitter Section
The transmitter consists of a high-performance 850 nm Vertical Cavity Surface Emitting Laser (VCSEL) laser in the optical subassembly (OSA), which is housed within a plastic barrel package. In addition, this component is a Class 1 Laser compliant with International Safety Standard IEC-825. The component also complies with EN60825-1 FDA 21 CFR 1040.10, and 1040.11
Receiver Section
The receiver consists of a GaAs PIN photodiode coupled to a high-sensitivity transimpedance ampliï¬er (TIA) in an OSA. This OSA combination is mated to a post ampliï¬er IC that provides the post ampliï¬cation SD (Signal Detection) or LOS (Loss of Signal) indication circuit, which provides logic high-state output when an unusable input optical signal level is detected.
Features
The Edgecore ET4205-SX transceiver is a small form-factor pluggable (SFP) module with a standard duplex connector for ï¬ber communications. This cost-effective module is designed for multimode ï¬ber (MMF) and operates at a nominal wavelength of 850 nm with high performance. The module supports an SFP 20-pin connector for hot-plug capability.
Transmitter Section
The transmitter consists of a high-performance 850 nm Vertical Cavity Surface Emitting Laser (VCSEL) laser in the optical subassembly (OSA), which is housed within a plastic barrel package. In addition, this component is a Class 1 Laser compliant with International Safety Standard IEC-825. The component also complies with EN60825-1 FDA 21 CFR 1040.10, and 1040.11
Receiver Section
The receiver consists of a GaAs PIN photodiode coupled to a high-sensitivity transimpedance ampliï¬er (TIA) in an OSA. This OSA combination is mated to a post ampliï¬er IC that provides the post ampliï¬cation SD (Signal Detection) or LOS (Loss of Signal) indication circuit, which provides logic high-state output when an unusable input optical signal level is detected.
Features
- Single + 3.3 V power supply
- Differential inputs and outputs
- Small Form Factor Pluggable MSA compliant.
- Compliant with SFF-8472 MSA Digital Diagnostic Monitor (DDM), Internal Calibration. (SJ Series)
- Class 1 Laser International Safety Standard IEC 825 compliant.
- Complies with EN60825-1, FDA 21 CFR 1040.10, and 1040.11
- Commercial Operation Temperature: 0°C to +70°C
- Industrial Operation Temp.: -40°C to +85°C
- RoHS compliant
Overview
The Edgecore ET4205-SX transceiver is a small form-factor pluggable (SFP) module with a standard duplex connector for ï¬ber communications. This cost-effective module is designed for multimode ï¬ber (MMF) and operates at a nominal wavelength of 850 nm with high performance. The module supports an SFP 20-pin connector for hot-plug capability.
Transmitter Section
The transmitter consists of a high-performance 850 nm Vertical Cavity Surface Emitting Laser (VCSEL) laser in the optical subassembly (OSA), which is housed within a plastic barrel package. In addition, this component is a Class 1 Laser compliant with International Safety Standard IEC-825. The component also complies with EN60825-1 FDA 21 CFR 1040.10, and 1040.11
Receiver Section
The receiver consists of a GaAs PIN photodiode coupled to a high-sensitivity transimpedance ampliï¬er (TIA) in an OSA. This OSA combination is mated to a post ampliï¬er IC that provides the post ampliï¬cation SD (Signal Detection) or LOS (Loss of Signal) indication circuit, which provides logic high-state output when an unusable input optical signal level is detected.
Features
Single + 3.3 V power supply
Differential inputs and outputs
Small Form Factor Pluggable MSA compliant.
Compliant with SFF-8472 MSA Digital Diagnostic Monitor (DDM), Internal Calibration. (SJ Series)
Class 1 Laser International Safety Standard IEC 825 compliant.
Complies with EN60825-1, FDA 21 CFR 1040.10, and 1040.11
Commercial Operation Temperature: 0°C to +70°C
Industrial Operation Temp.: -40°C to +85°C
RoHS compliant
The Edgecore ET4205-SX transceiver is a small form-factor pluggable (SFP) module with a standard duplex connector for ï¬ber communications. This cost-effective module is designed for multimode ï¬ber (MMF) and operates at a nominal wavelength of 850 nm with high performance. The module supports an SFP 20-pin connector for hot-plug capability.
Transmitter Section
The transmitter consists of a high-performance 850 nm Vertical Cavity Surface Emitting Laser (VCSEL) laser in the optical subassembly (OSA), which is housed within a plastic barrel package. In addition, this component is a Class 1 Laser compliant with International Safety Standard IEC-825. The component also complies with EN60825-1 FDA 21 CFR 1040.10, and 1040.11
Receiver Section
The receiver consists of a GaAs PIN photodiode coupled to a high-sensitivity transimpedance ampliï¬er (TIA) in an OSA. This OSA combination is mated to a post ampliï¬er IC that provides the post ampliï¬cation SD (Signal Detection) or LOS (Loss of Signal) indication circuit, which provides logic high-state output when an unusable input optical signal level is detected.
Features
Single + 3.3 V power supply
Differential inputs and outputs
Small Form Factor Pluggable MSA compliant.
Compliant with SFF-8472 MSA Digital Diagnostic Monitor (DDM), Internal Calibration. (SJ Series)
Class 1 Laser International Safety Standard IEC 825 compliant.
Complies with EN60825-1, FDA 21 CFR 1040.10, and 1040.11
Commercial Operation Temperature: 0°C to +70°C
Industrial Operation Temp.: -40°C to +85°C
RoHS compliant